Sew Double Face Interlock Knit Fabric Like a Pro

2026-11-20


Sew
Image Source: statics.mylandingpages.co

Sewing double face interlock knit fabric succeeds with three simple tools: a stretch needle, a narrow zigzag or overlock stitch, and careful pressing. This fabric has no wrong side. Every seam and hem must look good on both faces. Interlock stays stable and does not curl, which makes it easier than many knit fabrics. The main challenges are bulk and stitch quality.

Key Takeaways

  • Double face interlock knit has no wrong side, so every seam and hem must look good on both sides.
  • Use a stretch needle, polyester thread, and a narrow zigzag or overlock stitch for best results.
  • Prewash the fabric to shrink it and remove finishes before cutting.
  • Reduce bulk by trimming seam allowances and pressing each seam carefully.
  • Fix common issues like skipped stitches and tunneling by adjusting needle, tension, and pressing habits.

What Makes Double Face Interlock Knit Fabric Different

Two Faces, No Wrong Side

Double face interlock knit fabric looks the same on both sides. Two interlocking sets of thread create this reversible structure. Each face shows smooth knit stitches, so neither side looks like a back. This trait changes how a sewer plans every project. A seam that looks neat on one side must also look neat on the other. The fabric offers two usable faces, and both faces deserve the same care. Many sewers treat double knit fabric as a single-faced material and hide the inside. That approach fails here. The two interlocking sets of thread make both faces visible, so every stitch shows.

Stable with No Curling

Interlock knit fabric holds its shape well. The edges do not curl the way jersey edges do. This stability comes from the interlocking sets of thread inside the fabric. A sewer can cut double knit fabric and leave it on the table without worry. The cut edges stay flat. This flat edge makes sewing knit fabric simpler than many people expect. Pins hold better, and clips grip the layers. The stable structure also helps when a sewer positions a pattern piece. Double knit stays where it lands.

How Interlock Knit Fabric Stretches

Interlock stretches across the width and along the length. The interlock structure gives this two-way stretch. A doubleknit garment moves with the body in every direction. The stretch amount stays modest, though. Double knit fabric stretches less than jersey, so it holds a fitted shape. A sewer should test the stretch of each double knit before choosing a pattern. The interlock knit fabric recovers well after stretching. This recovery keeps hems and necklines from growing loose. Double knit fabric rewards a sewer who respects its stretch limits.

Tools for Sewing Double Knit Fabric

Tools
Image Source: pexels

Stretch Needle

A 75/11 stretch needle suits most double knit projects. This needle features a rounded tip. The tip slips between the loops of the knit instead of piercing them. A ballpoint needle also works well on heavier weights. Both needles protect the fabric structure and prevent runs. The 75/11 stretch needle handles medium-weight fabric with ease. A sewer should replace the needle for double knit fabric after every few projects. Dull needles cause skipped stitches and small holes. A fresh needle makes a visible difference in stitch quality.

Thread and Machine Settings

Polyester thread gives the best results for knit sewing. All-purpose polyester thread stretches with the fabric and holds up to wear. A sewer should match needles and thread to the fabric weight. A narrow zigzag stitch or an overlock stitch handles seams on this fabric. The machine needs a slightly longer stitch length for bulkier weights. A sewer can add interfacing for double knit fabric to stabilize areas like buttonholes. Knit interfacing with double knit fabric supports collars and plackets without stiffness. A fusible knit interfacing keeps the fabric's stretch intact. Lightweight knit interfacing works best for most sewing knit fabric tasks. A test seam on a scrap first confirms the settings.

Pressing Tools

A pressing cloth and a steam iron form the core pressing kit. A tailor's ham helps shape curved seams. A seam roll prevents shine along long seams. These tools support careful pressing on both faces of the fabric. A sewer should press each seam before moving to the next one. Gentle steam relaxes the fibers and sets a clean finish.

Prep Steps Before Sewing Interlock Knit Fabric

Prewash and Dry

A sewer should pretreat double knit fabric before any cutting begins. Wash the yardage in warm water with a gentle detergent. Tumble dry on low heat or hang the fabric to dry. This step shrinks the fabric and removes factory finishes. Skipping this step risks a finished garment that shrinks after the first wash. A sewer who plans to pretreat before cutting protects the final fit. The fabric may lose a small amount of length during drying. Measure the yardage again after washing to confirm the amount.

Choose Simple Patterns

Simple patterns suit double knit fabric best. Look for designs with few seams and clean lines. A pull-on skirt, a simple top, or a straight dress works well. These shapes show off the fabric's two faces without clutter. Complex designs with many darts and pleats add bulk at every junction. A sewer new to working with knit fabric should start with a pattern that has three or four pattern pieces. Fewer pieces mean fewer seams to finish on both sides. Simple shapes also make pressing easier.

Cut and Mark Carefully

Lay the double knit flat on a stable surface. Smooth the fabric without stretching it. Place pattern pieces with the grain and pin or clip inside the seam line. Cut with sharp shears in long, smooth strokes. Mark notches with snips no deeper than 1/8 inch. Chalk marks work well on double knit, and they brush away cleanly. Test any marking tool on a scrap first. A sewer should mark both faces when the pattern calls for it. Careful cutting keeps the two faces aligned during sewing knit fabric projects.

Seams and Hems on Double Knit

Seams
Image Source: unsplash

Seams and hems decide whether a double knit garment looks handmade or professional. Both faces of the fabric stay visible, so every stitch line must pass inspection from either side. A sewer who plans each seam with both faces in mind avoids the most common disappointment. The techniques below cover stitch selection, bulk control, and hem finishing for double knit.

Stitch Choices for Seams

A narrow zig-zag stitch handles most seams on double knit fabric with reliable results. Set the stitch width to about 0.5 mm and the length to 2.5 mm. This setting allows the seam to stretch without breaking the thread. A straight stitch alone will snap under tension, so the slight zigzag gives necessary flexibility. A sewer can also use an overlock stitch on a serger for a clean, strong seam. The overlock trims the seam allowance and wraps the edge in one pass. This method works well on bulky doubleknit because it removes excess fabric as it sews. A stretch stitch built into modern machines offers another option. This stitch looks like a narrow lightning bolt and provides excellent recovery. Test each stitch on a scrap of the same double knit fabric before committing to a garment. The scrap test reveals how the stitch behaves on that specific weight and fiber content. A sewer should also adjust the presser foot pressure for thick double knit. Light pressure prevents the fabric from stretching during sewing knit fabric projects. The machine's differential feed, when available, helps control the fabric feed on stretchy interlock. A sewer who takes five minutes to test stitches saves hours of seam ripping later.

Reduce Bulk in Seams

Double knit fabric creates thick seam allowances that show through on both faces. A sewer must reduce this bulk at every junction. Trim seam allowances to 3/8 inch after sewing. Grade the allowances on curved seams by trimming one layer shorter than the other. This step staggers the bulk and prevents a ridge from forming on the outside. Clip inner curves at regular intervals to release tension. Notch outer curves to allow the fabric to spread flat. Press each seam open with a seam roll underneath. The seam roll supports the seam and prevents the edges from imprinting on the face. A sewer can also press seams flat and then press them open for a flatter result. Avoid bulky seam finishes like folded binding on double knit. The fabric already has enough thickness. A simple overlock edge or a zigzag finish keeps the seam allowance flat. For intersecting seams, trim the corners diagonally before turning. This technique reduces the lump at pocket corners and shoulder junctions. A sewer who controls bulk at each step produces a garment that hangs smoothly on both sides.

Finish Both Sides of Hems

Hems on double face interlock knit fabric require equal attention on both faces. A twin needle creates two parallel lines of stitching on the outside and a zigzag on the inside. This finish looks professional and allows the hem to stretch. Use a stretch twin needle and woolly nylon thread in the bobbin for best results. The woolly nylon adds stretch and softness to the inside of the hem. A coverstitch machine produces a similar result with more durability. The coverstitch folds the hem and sews a stretchy band that looks clean on both sides. A sewer without these machines can use a narrow zig-zag stitch on the hem edge. Fold the hem once, press it carefully, and stitch close to the fold. The zigzag allows the hem to maintain the fabric's stretch without popping. Hand blind hemming offers another option for a nearly invisible finish. This method works well on dressier double knit garments. Use a fine needle and a single strand of polyester thread. Take tiny stitches that catch only one thread of the fabric face. A knit interfacing strip in the hem fold adds stability without stiffness. This interfacing keeps the hem from growing wavy over time. Press the finished hem gently on both sides with a pressing cloth. A sewer who finishes both sides intentionally creates a garment that looks good inside and out.

Fix Common Double Knit Sewing Problems

Even a careful sewer meets trouble on double knit fabric from time to time. Most problems trace back to needle choice, machine settings, or pressing habits. A sewer who learns to read the symptoms can correct each issue fast. The fixes below cover the three problems that appear most often in sewing rooms.

Skipped Stitches

Skipped stitches leave small gaps in a seam line. The machine fails to form a loop on some stitches. A dull needle causes most of these gaps. The needle tip bends or blunts after hours of use. It then pushes the fabric instead of slipping between the loops. A fresh stretch needle solves this problem in most cases. The rounded tip finds the gap between the knit loops with ease.

The wrong needle size also triggers skipped stitches. A needle that is too fine for thick doubleknit bends under pressure. A needle that is too heavy punches holes and distorts the fabric. A sewer should match the needle size to the fabric weight. A 75/11 stretch needle handles medium weights well. A 90/14 ballpoint needle suits heavier double knit fabric.

Poor thread tension adds to the problem. Loose upper tension lets the needle thread slip out of the scarf. The hook then misses the loop. A sewer should check the tension on a scrap first. The stitch should look balanced on both faces. The bobbin case also deserves a look. Lint in the bobbin area blocks the thread path. A quick clean with a brush restores smooth stitching.

The fabric itself can cause skips. Some double knit fabric carries a heavy finish that resists the needle. A sewer can wash the yardage before sewing to remove the finish. Prewashing also softens the hand of the fabric. A drop of sewing machine oil on the needle helps in rare cases. A sewer should test this trick on a scrap first.

Tunneling and Wavy Seams

Tunneling shows as a raised ridge between two stitch lines. The fabric puffs up in the middle of a seam. This problem appears most often with twin needle work. The twin needle pulls two lines of thread through the fabric. The space between the lines has no support. The fabric then rises like a tunnel. A sewer can reduce tunneling with a few adjustments.

First, loosen the bobbin tension slightly. Tight bobbin thread pulls the fabric up between the needles. Second, use a stabilizer under the seam. A strip of knit interfacing supports the fabric and keeps it flat. Third, shorten the stitch length. A shorter stitch grips the fabric better and limits the rise. Fourth, slow the machine speed. Fast sewing stretches the fabric and worsens the tunnel.

Wavy seams tell a different story. The fabric ripples along the stitch line. This problem comes from stretching during sewing. A sewer who pulls the fabric through the machine creates waves. The feed dogs should move the fabric, not the hands. Light pressure from the presser foot also helps. Heavy pressure flattens the fabric and distorts the knit structure. A sewer should lower the presser foot pressure on thick double knit.

The stitch choice matters here too. A straight stitch on a stretchy seam breaks or waves. A narrow zigzag allows the seam to stretch with the fabric. An overlock stitch on a serger handles the edge and the seam in one pass. The differential feed on a serger prevents stretching as it sews. A sewer without a serger can use a walking foot on a regular machine. The walking foot feeds both layers evenly and stops the waves.

Pressing fixes many wavy seams after the fact. A burst of steam relaxes the fibers. The seam then lies flat again. A sewer should press the seam on a seam roll to avoid imprinting the edges.

Pressing Mistakes to Avoid

Pressing makes or breaks a double knit garment. The fabric shows every iron mark on both faces. A few common mistakes ruin the finish. A sewer who avoids them saves hours of rework.

The first mistake is pressing without a cloth. A hot iron leaves shine on the fabric face. The shine never comes out. A pressing cloth protects the surface and spreads the heat. A sewer should always use one on double knit.

The second mistake is sliding the iron. Dragging the iron stretches the knit and distorts the seam line. A sewer should lift and press instead. The iron goes down, steams, and lifts away. This motion sets the seam without stress.

The third mistake is too much heat. High heat melts synthetic fibers and flattens the knit loops. The fabric then looks thin and shiny. A sewer should test the iron temperature on a scrap first. The iron should sit at a medium setting for most double knit fabric.

The fourth mistake is pressing seams open without support. A flat ironing board pushes the seam edges into the fabric face. The ridge shows through on the outside. A seam roll or a folded towel under the seam prevents this problem. The curved surface supports the seam and keeps the face smooth.

The fifth mistake is skipping the press between steps. A sewer who sews the whole garment and then presses at the end fights a losing battle. Each seam should get a press before the next one crosses it. This habit keeps the garment flat and the seams crisp. A sewer who follows these tips builds a garment that looks clean on both faces.


A sewer can master double face interlock knit fabric with one reliable formula. A stretch needle, a narrow zigzag or overlock stitch, and gentle pressing deliver clean results every time. The stability and no-curl nature of interlock work in the sewer's favor throughout the project. Test stitches on scraps before sewing, and finish both sides of every seam with equal care. These habits turn double knit projects into polished garments. With practice, professional-looking results are well within reach. Many knit fabric sewing tutorials confirm this approach, and a sewer who follows it builds lasting confidence with every knit garment.

FAQ

Does double face interlock knit fabric fray?

Interlock knit fabric does not fray like woven fabric. The interlocking loops hold the cut edge together. A sewer can leave cut edges unfinished for short periods. Long-term wear still calls for a seam finish. An overlock or zigzag edge keeps the seam allowance neat through many washes.

Can a sewer use a regular sewing machine on double knit?

A regular sewing machine handles double knit fabric well. A stretch needle and a narrow zigzag stitch cover most needs. The machine needs correct tension and light presser foot pressure. A walking foot helps feed thick layers evenly. No serger is required for clean results.

Which stitch works best for hemming interlock knit fabric?

A twin needle produces two parallel lines on the face and a zigzag on the back. This finish stretches and looks professional. A coverstitch machine offers similar results with more durability. A narrow zigzag close to the fold works well for beginners. Hand blind hemming suits dressier garments.

How does a sewer prevent stretched necklines on double knit?

Stay tape or a strip of knit interfacing stabilizes the neckline before sewing. Sew with the fabric on top and the stabilizer underneath. Let the feed dogs move the fabric. Avoid pulling the fabric through the machine. A gentle press after sewing restores the shape.

Can a sewer iron double knit fabric directly?

Direct iron contact risks shine and melted fibers. A pressing cloth protects both faces. The iron should sit at a medium setting. Lift and press instead of sliding the iron. Test the temperature on a scrap first. Gentle steam relaxes the fibers without damage.